On DIN Rail EN60715(35mm) by means of fast clip device
Connection
Power Supply in Both Directions
Tripping Current Range:
Lagging Angle
I△n>0.01A
I△n≤0.01A
0°
0.35I△n ≤ I△ ≤ 1.4I△n
0.35I△n ≤ I△ ≤ 2I△n
90°
0.25I△n ≤ I△ ≤ 1.4I△n
0.25I△n ≤ I△ ≤ 2I△n
135°
0.11I△n ≤ I△ ≤ 1.4I△n
0.11I△n ≤ I△ ≤ 2I△n
Alternative Current Sensitive
Pulsating Direct Current Sensitive
Surge Current Proof
B Class Tripping is ensured for sinusoidal AC residual currents pulsed DC residual current, alternating residual sinusoidal currents up to 1000Hz, pulsating direct residual currents and for smooth direct residual currents, whether applied suddenly or increasing slowly.
They react to AC and pulsating DC fault current which reach 0 or almost 0 within one time period of the mains frequency.
RCCB’s surge capacity. Not tripping at standardized 8/20 us surge-current waves acc.to VDE 0432 Part 2 with surge current values of up to 250A.
NDB1LE-100 is a compact residual-current circuit breaker for low-voltage terminal distribution. It combines overload, short-circuit, earth-leakage and isolation protection in one DIN-rail device. Typical configuration only. Final ratings are conf...
Applications: NDG3A series of disconnecting switches are applicable to electric systems with a rated voltage not higher than DC 1000V or AC 800V and a rated current not higher than 500A, 630A, 800A. They can be connected and disconnected a...
1.Application NDB1-125 series is used in low voltage electrical distribution system in industry, real estate, power, telecom, construction field, etc. 2.Specification 3.Working conditions: 4.Packing and depositing:
NDB1L-32 is a compact RCBO for low-voltage terminal circuits. It provides overload, short-circuit and residual-current protection while allowing neutral-pole switching in a space-saving 1P+N format. Typical configuration only. Final ratings are co...
Отправить запрос о продукте
Мы свяжемся с вами в течение 24 часов